Marshall Major III Bluetooth: fix broken earcup holder


Как починить сломаную дужку держателя наушника если она выскочила из шарнира. Нужно снять амбашуру, раскрутить наушник и закрутить винт.

Выскочила проволка, на ней есть углубление в которое вкручивается винт. Popped out the holder’s wire, it has a small pit where it should be fixed with screw
В шарнире отверстие куда вставляется проволка и фиксируется закрученым изнутри болтом. In the joint/hinge it must me fixed screwed in from inside of ear cup
Коробкой от айфона раздвинул наушники. Used a box from iPhone to widen the tight headphones
Раскрученный наушник и винт который держит шарнир и проволку держателя. Прямо над ним оголёный провод и акамулятор из-за которого сложно добраться отвёрткой. Сам винт маленький и неудобный: отвёрткой можно сбить насечку. Inside of ear cup you may see the screw that fixes the joint. Right above it a naked strand of wire without rope. There is also an accumulator so it’s hard to use screwdriver. The screw is small and uncomfortable: it’s easy to break it’s head with a screwdriver
Вот как выглядит шарнир и видно внутри чёрный винт который зажимает проволку. The joint and you may see black screw inside that must push and fix the wire from ear cup holder
Держа наушник в таком виде на краю стола его можно закрутить. Holding headphones on the table’s edge I was able to install screw back

In conclusion: as for me this is a very bad construction and it’s quality doesn’t feels good. But anyway it’s great that we can fix this ourselves. Interesting that while I searched it turned out that this headphones are very often faked. It’s hard to determine where fake and where original but for example people says that if the QR code on the right ear cup is printed on a white background than this is and original headphones. But on mine Major 3 the QR is printed without the white background and can’t be even scanned:

Я в шоке потому что купил их в хорошем магазине и уверен что это оригинал тем более звук на высоте. Но по прежнему не могу поверить что производитель знает что некоторые покупатели могут быть обмануты но они даже не положили инструкцию как проверить и не написали на сайте. Единственное что у них есть на офсайте это всякие хипстеры но никаких фоток с внутренностями и деталями конструкции.

I’m shocked because I bought them in a retail shop with a good reputation. I’m pretty sure that they are original but still I can’t believe that manufactures knows that some buyers may be fooled but they don’t even added an instruction about how to check headphones inside the box and on the website. The only thing that I see on the official Marshall website are some «stylish people» with the headphones but no any photos of internals and construction details.

UPD через год опять сломалось в том же месте. В этот раз мне было лень и я просто взял кусок мягкого пакета, обернул штырь и вставил обратно. Получилась прокладка которая держит тесно штырь и он не вылетает из паза. Ещё и дерматин на амбушюрах начал линять, и стильные наушники превратились в мерзость.

UPD Aftrer a year they were broken again in the same place. This time I was lazy and I just took a slice of a soft packet and used it as shim to fix pin tightly. The ear pads leatherette started to shed and stylish heaphones become disquasting.

soft packet as shim to fix pin

Оставьте комментарий